Trolling Jig
Trolling Jig
![]() |
How To Go Trolling For Crappie
Crappie fishing is a great sport enjoyed by anglers of all ages and skill levels. One of the best methods to use when fishing for crappie is trolling.
This is an easy technique to use when crappie fishing and it is a very effective one when done correctly. So, how do you go trolling for crappie if you want to be successful and return home with a catch you can be proud of?
The first step is to know a little bit about the crappie such as, where they are normally found during each season and what they feed on. For instance, during the spring you can usually find the crappie moving closer to shore where they can be found in water less than five feet deep.
In the heat of the summer they will be out deeper in the water and they will be a little harder to locate. In the fall they will be moving back to shallow water and in the winter months they are the least active.
One reason that trolling is so popular is because it is one of the fastest and easiest ways for you to locate and reel in the crappie. It is a great way to catch several fish at once and have lots of fun in the process.
Trolling for crappie is a fairly easy method of fishing that needs a few accessories to get started. Once you have everything you need you are ready to start reeling in the crappie.
What You Will Need for Trolling
Trolling requires having a boat that is equipped with a trolling motor, fishing rods and holders. Plus you will need all the accessories such as tackle and bait as well. The trolling motor is extremely important because it will keep you moving at the same slow speed while trolling for crappie.
You need a motor that will move the boat around very slowly because the slower you move the better your fishing will be.
Trolling requires having several fishing rods with holders located on the side of the boat. They should be placed about two to three feet apart. It is suggested that you use different bait on each line for the best results.
This will help you determine which bait is attracting the crappie the most. When you are trying to decide which bait to use, most anglers agree that minnows are the best if you are going to use live bait. This is because it is one of their favorite meals that always seem to get their attention. Jigs are the best alternative to live bait and you have a wide selection of these to choose from.
The jigs should be set up with different weights on each line so that you can fish at a variety of different depths at the same time. This will allow you to cover more ground and determine the depth of the crappie much faster than if you were fishing just one depth.
Don't hesitate to experiment with different combinations of colors and sizes until you find one that seems to be getting the results you are hoping for. Normally, the best colors to use are yellow, chartreuse, green, blue and black.
About the Author
Dan Eggertsen is a fishing researcher and enthusiast who is committed to providing the best crappie fishing information possible. Get more information on trolling for crappie here: http://www.askcrappiefishing.com/
|
|
Jig $6 Jig |
|
|
Jig New 8CM 500PCS per pattern Squid Soft squid lure/Trolling Big Game Lure Bait Skirt /Squid skirt $100 Jig New 4.5inch 500PCS per pattern Squid Soft squid lure/Trolling Big Game Lure Bait Skirt /Squid skirt |
|
|
Jig Cal $8.99 Jig Cal |
|
|
Jig It In Style $12.79 Jig It In Style |
|
|
Optimist'S Jig $8.99 Optimist'S Jig |
|
|
Trolling $24.33 No Synopsis Available |
|
|
The Ballintore Jig $10 The Ballintore Jig - Paddy Keenan |
|
|
Trolling Motor, Minnkota Maxxum $778.99 TROLLING MOTOR, MINNKOTA MAXXUM |
|
|
JIG $9.39 Rated: PGSynopsis: NA |
|
|
Rig-A-Jig-Jig: Dance Music Of The South Of England $11.49 Rig-A-Jig-Jig: Dance Music Of The South Of England |
|
|
(The) English Stage Jig $12.49 (The) English Stage Jig |
|
|
Genuine Negro Jig $9.49 Genuine Negro Jig |
|
|
Galician Jig $10 Galician Jig - The Canadian Scottish Regiment and Third Marine Aircraft Wing Ba |
|
|
Trolling Motor, Minn Kota, Edge $280.99 TROLLING MOTOR, MINN KOTA, EDGE |
|
|
Trolling Motor, Minn Kota Edge $518.99 TROLLING MOTOR, MINN KOTA EDGE |
|
|
Trolling Motor, Minn Kota, Fortrex $1082.99 TROLLING MOTOR, MINN KOTA, FORTREX |
|
|
Trolling Motor, Minn Kota, Engine $934.99 TROLLING MOTOR, MINN KOTA, ENGINE |
|
|
Trolling Motor, Minn Kota, Endura $238.99 TROLLING MOTOR, MINN KOTA, ENDURA |
|
|
Devil Dancing Jig $49.99 Devil Dancing Jig - Giclee Print |
|
|
Delta 34-184 Universal Tenoning Jig $109.99 Universal Tenoning Jig - 34-184 |
|
|
Delta 43-188 Sliding Shaper Jig $119.99 Sliding Shaper Jig - 43-188 |
|
|
Minnow Jig 24 Pack $34.95 Only Soft Bait that can be fished as a minnow or a jig. |
|
|
Harlem Jig, 2001 $49.99 Colin Bootman Harlem Jig, 2001 - Giclee Print |
|
|
Trolling Motor, Fortrex 101/Us2, 45" $1192.99 TROLLING MOTOR, FORTREX 101/US2, 45" |
|
|
Optimist's Jig $15.99 Track Listing: 1. Kesh Jig / Irishman's Heart To The Ladies / Jig OF Slurs / Kaliope House , 2. Boots and Saddles, 3. Optimists' Jig, 4. Ring of Fire, 5. Lark, The, 6. Maxwell's Rant / Big Hop, The / Thomasina & Eileen's Reel , 7. Soldier's Tale, 8. Hills of Pine Valley, 9. Raggle Taggle Gypsy, 10. Planxty Irwin, 11. St. Clements Jig, 12. La Cardeuse, 13. Mick Duggan's / Grnaihm / Wind & Rain / OId She , 14. Lot Like Me, A, 15. On My Way |
|
|
Treble Jig $95.59 High Quality Content by WIKIPEDIA articles A treble jig is an Irish dance which is done in hard shoes. It is also known as the heavy jig (as opposed to the light jig, slip jig, and single jig, and reel which are done as soft shoes). It is performed to music with a 6/8 time signature. The dance is usually 40 bars to 48 bars in length, but is danced for 32 bars if one is in beginner to prizewinner. The dance is one of three main hard shoe dances (the other two being the Hornpipe and the set dances such as St. Patricks Day and Blackbird), and is done by most dancers.There are fast and slow versions of the treble jig. The fast version is danced by the younger or less advanced dancers and the slow is danced by the more advanced dancers. The fast is actually to fast music with fewer steps. The slow is danced to slow music so that they can fit more steps into it. There are many different versions of this dance. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 110 Publication Date: 2010/12/17 Language: English Dimensions: 6.00 x 9.02 x 0.26 inches |
|
|
Jig (Tool) $70.1 A jig is any of a large class of tools in woodworking, metalworking, and some other crafts that help to control the location or motion of a tool. Some types of jigs are also called templates or guides. The primary purpose for a jig is for repeatability and exact duplication of a part for reproduction. An example of a jig is when a key is duplicated, the original is used as a jig so the new key can have the same path as the old one. Since the advent of automation and CNC machines, jigs are often not required because the tool path is digitally programmed and stored in memory. Jigs may be made for reforming plastics. Jigs or templates have been known long before the industrial age. There are many types of jigs, and each one is customtailored to do a specific job. Many jigs are created because there is a necessity to do so by the tradesmen. Some are to increase productivity, to do repetitious activities and to do a job more precisely. Because jig design is fundamentally based on logic, similar jigs used in different times and places may have been created independently Author: Miller, Frederic P./ Vandome, Agnes F./ McBrewster, John Binding Type: Paperback Number of Pages: 76 Publication Date: 2010/07/31 Language: English Dimensions: 5.98 x 9.01 x 0.18 inches |
|
|
Largemouth Bass, Weedless Jig $24.99 Wally Eberhart Largemouth Bass, Weedless Jig - Photographic Print |
|
|
BoatBuckle / BoatBuckle Trolling Motor Tie-Down / F15437 $22.95 BoatBuckle - BoatBuckle Trolling Motor Tie-Down - F15437 |
|
|
Garmin Trolling Motor For 240/ 185 0101020000 $62.89 Garmin Trolling Motor For 240/ 185 0101020000 |
|
|
Trolling Motor, Minn Kota Endura 45 $214.99 TROLLING MOTOR, MINN KOTA ENDURA 45 |
|
|
Trolling Motor, Minn Kota Power Driv $446.99 TROLLING MOTOR, MINN KOTA POWER DRIV |
|
|
Trolling Motor, Minn Kota 55 Pd V2 $829.99 TROLLING MOTOR, MINN KOTA 55 PD V2 |
|
|
Trolling Motor, Minn Kota 70 Pd V2 $977.99 TROLLING MOTOR, MINN KOTA 70 PD V2 |


US $119.99






















































































